TechniSat SATMAN 45 Manual - Manual (Page 6)

6 Operating manual
EN
FR
IT
NL
CZ
PL
In order to receive the programmes of all 4 satellite positions via your digital receiver, you must pro-
gramme these satellite positions in the antenna settings of your receiver, as per the operating manual of
your receiver.
Position/Option Switching criterion Satellite
A/A 1 Astra 19,2° East
B/A 2 Eutelsat 13,0° East
A/B 3 Astra 23,5 ° East
B/B 4 Eurobird-Astra 28,5° East
Set the 4 switching criteria of the DiSEqC control as follows:
1. Push the LNB housing onto the twin-tube frame, and hold it in position by means of the self-tap-
ping internal hexagolnal screw supplied.
2. Now use a suitable antenna calibration tool (DiSEqC setting: A/A) to position the dish fort he
Astra 19,2° East satellite.
3. Use a suitable co-axial cable to connect the LNB to the digital receiver.
Note!
Do not open the LNB housing, as this would compromise the weatherproof qualities, and the LNB could
be damaged by seeping water and humidity. Opening the LNB housing will void the guarantee!
Internal hexagonal screw