TechniSat TechniCorder ISIO STC - Manual (Page 32)

32
Software updates
The digital receiver will now check whether a new version of the software is available for
the receiver. If a new software version is available, you can carry out an automatic software
update.
> If you do not want to wait for a search for new software or a software download, you
can skip this step if you wish by pressing the Info button.
If the search for new software or updates is skipped, your device will run another test
at a set time as per section 18.5.2 in your operating manual and will load the soft-
ware automatically as long as the function (section 18.5.1 in your operating manual)
remains activated and the unit is in standby mode at this time.
> If there is no new TV software available, you can press the OK button to go to the
next step of the installation wizard.
> If, on the other hand, new TV software is found, the automatic software update can
be started by pressing the OK button.
The message “Updating software, please wait.” now appears along with
a progress bar showing the progress of your download.
Two additional progress bars then appear showing the progress of the individual
updating steps.
Then AutoInstall is resumed.
ISIO internet list updates
The receiver contains a pre-programmed ISIO list with web links. This can be updated auto-
matically.