Step 7, Step 4, Swingaway – SwingAway SWG200SBR14 User Manual
Page 7: Pro traveler
STEP 7
IMPORTANT!
LEVEL YOUR MACHINE
TIGHTEN TELESCOPE KNOB
TOUCH
FLOOR
TOUCH
FLOOR
IMPORTANT:
BOTTOM BOOM FOOT
NEEDS TO BE ON THE FLOOR
KNOB
TIGHT
KNOB
TIGHT
KNOB
TIGHT
LOOSEN
KNOB
THEN
TIGHTEN
WHILE ON A FLAT SURFACE, ADJUST THE FRAME BY
PULLING OR PUSHING THE TELESCOPING TUBES
MAKE SURE ALL THE FEET ARE TOUCHING THE GROUND
TIGHTEN THE KNOB ON THE MIDDLE TELESCOPE FITTING
SWINGAWAY
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
PRO TRAVELER
ASSEMBLY MANUAL
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved
STEP 4
INSERT THE OTHER END OF THE
TELESCOPE INTO THE
BOOM SUPPORT FITTING
TIGHTEN
KNOB
BOOM
SUPPORT
FITTING
(BLACK)
CORDS NOT
SHOWN FOR
CLARITY
SWINGAWAY
SWINGAWAY
SPORTS PRODUCTS
SPORTS PRODUCTS
PRO TRAVELER
ASSEMBLY MANUAL
THE "SwingAway®" PRODUCT IS PROTECTED UNDER US PATENTS 5,795,250 AND 7,914,400.
Copyright © SwingAway Sports, Inc. 2013 | All Rights Reserved