SUUNTO COMBOS - Manual (Page 5)

5
CB-ONE Module Assembly when using the SUUNTO Quick Release
If the SUUNTO Quick Release (QR) is used the hose cover should be attached on the high pressure hose below the female
end of the QR. The male part is attached to the pressure gauge which is then fi tted onto the CB-ONE front cover according
to the picture below.
CB-IN-LINE Module Assembly
The CB-IN-LINE module fi ts the Suunto Vyper and Zoop dive computers or the SM-16 round depth gauge.
The Vyper locks in place on the IN-LINE module back cover. For the other instruments there are lugs on the back cover
aiding the orientation.
The Suunto Vyper and Zoop are delivered with a display shield.