Unpacking, Battery precautions – Chicago Electric SCREWING TOOL 95065 User Manual
Page 7
SKU 95065
For technical questions, please call 1-800-444-3353
Page 7
unpACKInG
When unpacking, make sure that all the parts are included. See Figure C below.
Charger
Adapter
Figure C
Cordless
Screwdriver
Screwdriver
Bits
If any parts are missing or broken, please call Harbor Freight Tools at the number
on the cover of this manual as soon as possible.
Battery precautions
To avoid accidents, never use a different charger adapter with this tool.
1.
Do not expose this product to rain or wet conditions.
2.
To avoid damage of cable and plug, never pull the cable to disconnect the Charger
3.
Adapter.
Do not charge the Screwdriver if either the cable or plug are damaged.
4.
Repairs should be carried out by a qualified service technician only.
5.
Do not touch the battery poles with any conductive source.
6.
note: The internal Battery Pack (22) does not come fully charged from the factory. Charge
before using.
REV 07a
- Auto-darkening Welding Helment with ANSI-Approved Lens 91214 (10 pages)
- 10" Compound Miter Saw with Laser Guide 69683 (20 pages)
- 95629 (39 pages)
- 12V Lithium-Ion Multifunction Tool 67707 (15 pages)
- 96405 (19 pages)
- 44567 (28 pages)
- Electric Impact Wrench 68099 (16 pages)
- 1/2" vaRiaBle SPeeD ReveRSiBle HEAVY DUTY DRILL 69452 (16 pages)
- 96035 (20 pages)
- 94882 (16 pages)
- 94739 (20 pages)
- CORDLESS SPRAY GUN 90880 (14 pages)
- MIG-100 91124 (13 pages)
- 9"Angle Grinder 93179 (12 pages)
- Heavy Duty Oxy - Acetylene Welding Outfit 92496 (20 pages)
- 18 Volt Corldess Impact Driver 68853 (12 pages)
- 67616 (16 pages)
- 91332 (8 pages)
- 12V Lithium CordLess drill 69360 (14 pages)
- 7" Angle Grinder 69454 (20 pages)
- Power Tools/ Electric Drywall Screwdriver 9624 (12 pages)
- 1/3 Sheet Finishing Sander 94338 (12 pages)
- Wire Feed Welder MIG 170 (32 pages)
- 97717 (15 pages)
- STUD WELDER DENT REPAIR KIT 3223 (9 pages)
- 99702 (22 pages)
- 68568 (12 pages)
- 45338 (15 pages)
- Power Tools 12" DOUBLE-BEVEL SLIDING COMPOUND MITER SAW WITH LASER GUIDE 69684 (20 pages)
- Circular Saw with Laser 95004 (18 pages)
- Power Tools / 1" Variable Speed SDS Rotary Hammer 69276 (16 pages)
- 12V Cordless Auto-Hammer 68364 (12 pages)
- Flexible Shaft Grinder/Carver 40432 (12 pages)
- 47991 (8 pages)
- 40388 (17 pages)
- MIG 200 93804 (36 pages)
- Stapler/Nailer 93749 (12 pages)
- 98107 (20 pages)
- 92880 (16 pages)
- 7.5 Amp Reciprocating Saw 69067 (16 pages)
- 66127 (12 pages)
- HARBOR FREIGHT TOOLS 98753 (11 pages)
- 67845 (16 pages)
- 1/2'' Electric Impact Wrench 45252 (16 pages)
- 14 Industrial Cut-off Saw 68104 (12 pages)