Clarion BLT433 - Manual (Page 20)

Troubleshooting
20
BLT433
This section lists some problems that you might encounter while using
your car handsfree. See your phone owner’s manual for configuration.
Cannot pair the car handsfree with the phone
The Bluetooth
®
function in your phone must be set to Automatic or On.
Your phone should be inside the car during the pairing procedure. The
car handsfree must be on.
Cannot connect to the car handsfree
The car handsfree may be connected to another Bluetooth
®
device or
your phone may be connected to another Bluetooth
®
device, such as a
headset. Disconnect the other Bluetooth
®
device.
You may have paired your phone with another handsfree device. Some
phones can only be paired with one handsfree device at a time. Please
check in the phone’s user documentation.
No sound contact between car handsfree and phone
The car handsfree and the phone you are using with it have to be paired
to recognize each other, and within range.
Some car handsfree functions do not work
If you notice that you cannot make use of all the features in the BLT433,
please check in your user documentation whether your phone supports
the function.
The phone may be paired in the wrong mode. Try clearing the pairing
and operating in the other mode.
NOTE :The compatibility and the connectability for all built-in Bluetooth
®
mobile is not
guaranteed. CM-HS1 works only when car stereo is switched on.
English