Clarion BLT433 - Manual (Page 11)

Press “Answer” button
to make or end a call
Using your CM-HS1
Ending a call
Use either of the following methods to end a call:
To end a call from the module,
short press the module’s
“Answer” button.
End a call from the
phone’s Keypad.
11
BLT433
Calling with the module using voice commands
If your phone support voice-activated dialing, you can use this feature
with your module. Note that voice-activated dialing on your phone must
be enabled and voice tags (name and commands) previously stored.
(Please refer to the phone’s user documentation for instructions on storing
voice tags.)
1. Briefly press the “Answer” button on the module.
2. After the tone, say the name of the person you wish to call.
3. The mobile phone automatically dials your selection, and you’ll see
the details of the call on the phone screen (varies with phone model).
4. When connected, you are free to communicate normally.
Note: The number of tones that you hear when voice dialing is dependent on
the type of the phone. With some phones, you may only hear one tone.
Say your voice command after the tone.
English