SUUNTO MEMORY BELT User Manual
Page 13
13
REPLACING THE BATTERY
The transmitter belt operates on a 3-Volt lithium cell, type: CR 2032. The average expected
battery life of the transmitter belt is 300 hours of use in ideal operating temperatures. To
replace the battery:
1. Insert a coin into the slot located on the battery compartment cover on the backside of the
transmitter belt.
2. Turn the coin counterclockwise until it is aligned with the open position marker, or even
slightly further for easy opening.
3. Remove the battery compartment cover. Ensure that the O ring and all surfaces are clean
and dry. Do not stretch the O ring.
4. Carefully remove the old battery.
5. Place the new battery into the battery compartment with the positive side facing up.
6. Replace the battery cover and turn clockwise until it is locked.
A short beep and a short green flash indicate that the new battery has been installed suc-
cessfully.
- HELO2 (116 pages)
- HELO2 (64 pages)
- D6I (130 pages)
- D6I (135 pages)
- A-10 (5 pages)
- AMBIT (120 pages)
- AMBIT2 User Guide (145 pages)
- AMBIT2 S User Guide (128 pages)
- AMBIT3 PEAK (127 pages)
- AMBIT3 SPORT (112 pages)
- BIKE POD (11 pages)
- CADENCE POD (7 pages)
- COBRA User Guide (123 pages)
- COBRA Quick Start (2 pages)
- COBRA3 User Guide (114 pages)
- COBRA3 Quick Start (2 pages)
- COMFORT BELT CODED (12 pages)
- DX (134 pages)
- EON STEEL (78 pages)
- FOOT POD (8 pages)
- Golf (32 pages)
- GPS POD (84 pages)
- GPS TRACK POD (32 pages)
- KB-20 (3 pages)
- LUMI User Guide (49 pages)
- LUMI Quick Start (13 pages)
- M9 (79 pages)
- M-9 (3 pages)
- MB-6 (6 pages)
- MC-2 (8 pages)
- MOSQUITO (122 pages)
- FAVOR AIR (40 pages)
- OCTOPUS II (66 pages)
- FAVOR S (65 pages)
- PC POD (9 pages)
- QUEST (53 pages)
- SK-7 DIVE COMPASS (12 pages)
- SK-8 DIVE COMPASS NH (6 pages)
- SMART BELT (22 pages)
- SOLUTION Alpha (41 pages)
- SPYDER (93 pages)
- T1 User Guide (44 pages)
- T1 Quick Start (12 pages)
- T3C User Guide (49 pages)