Crate Amplifiers 412B - Manual (Page 4)

FlexWave412A/B Guitar Enclosure
4
FlexWave 412A/B Technical Specifications:
Impedance 4 or 16 ohms Mono, 8 ohms Stereo
RMS Power Rating 120 watts Mono, 60 watts Stereo
Peak Power Handling 240 watts Mono, 120 watts Stereo
Frequency Response 80 Hz – 5 kHz
Sensitivity 96 dB SPL 1 watt/1 meter
Maximum SPL 118 dB
Transducers (4) Custom Design 12" 16 ohm 30 watt speakers
Full Range Inputs (3) 1/4" jacks: Mono In/Out, Stereo Left and Right
Dimensions (H x W x D) 31.5 in x 30.0 in x 14.0 in
80.0 cm x 76.2 cm x 35.6 cm
Weight FW412A: 50.0 lb/22.7 kg
FW412B: 52.0 lb/23.6 kg
Specifications subject to change without notice.
The FlexWave 412A and 412B are covered with a durable fabric-backed vinyl material. Wipe it clean
with a lint-free cloth. Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which
would damage the finish.
Crate continually develops new products, as well as improves existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Crate” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks or
registered trademarks of their respective holders and are hereby acknowledged.
Service Information:
If you are having a problem with your FlexWave 412A or 412B, you can go to our website
(www.crateamps.com) and click on Support for service information, or call 1-800-898-3211
during business hours (7 am to 5 pm PST, Monday-Friday). If you are outside of the U.S.,
contact your local distributor for technical support and service.
www.crateamps.com
©2007 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. 0023759 Rev. A 02/07