SUUNTO AMBIT3 PEAK - Manual (Page 23)

NOTE: If you are wearing your Suunto Ambit3 Peak on your
wrist, you will need to take it off in order to get an accurate
temperature reading because your body temperature will affect the
initial reading.
3.2.5 Using Automatic profile
The Automatic profile switches between the Altimeter and
Barometer profiles according to your movements. When the
Automatic profile is active, the device will automatically switch
between interpreting changes in air pressure as changes in altitude
or changes in weather.
alt 361 m 1020 hPa
12 ˚ C 12 ˚ C
It is not possible to measure weather and altitude changes at the
same time, as both cause a change in the surrounding air pressure.
Suunto Ambit3 Peak senses vertical movement and switches to
measuring altitude, when needed. When altitude is shown, it is
updated with a maximum delay of 10 seconds.
If you are at a constant altitude (less than 5 meters of vertical
movement within 12 minutes), Suunto Ambit3 Peak interprets all
pressure changes as weather changes. The measurement interval is
23