3 using heart rate belt – SUUNTO AMBIT2 S User Guide User Manual
Page 62
•
Select Track back to retrace your route at any point of your
exercise.
•
Select Find back to navigate back to the starting point of
your exercise.
•
Select Location to check the coordinates of your current
location, or save it as a POI.
•
Select POIs (Points of interest) to navigate to a POI.
•
Select Routes to navigate a route.
•
Select Logbook to navigate a route of one of your saved logs
with GPS data.
•
Select ACTIVATE to set the following features on or off:
•
Select Interval off/on to activate/deactivate interval timer.
The interval timer can be added to custom sport modes in
Movescount. For more information, see
.
•
Select Autopause off/on to activate/deactivate autopause.
•
Select Autoscroll off/on to activate/deactivate autoscroll.
•
Select HR limits off/on to set the HR limits on or off. The
heart rate limit values can be specified in Movescount.
•
Select Compass off/on to activate/deactivate the compass.
When the compass is activated during exercise, it is shown as
an additional display after the sport mode.
10.3 Using heart rate belt
A heart rate belt can be used during exercise. When you use a heart
rate belt, Suunto Ambit2 S gives you more information about your
activities.
62