Sure Heat VMR Vented - Manual (Page 5)

Log Placement
1. See log placement instructions below:
Page 5
Decorative Stone
The decorative stone from the bag provided should be spread on the floor of fireplace in front and on
sides of log set. The stone should not be placed on or near the burner contact with the burner can
cause the production of excessive carbon monoxide.
Place burner system in middle of fireplace.
Place middle main log in position. Make sure
the log notch is placed over the burner.
Arrange left top log. Arrange remaining 2 top logs. Then place 2 cover
logs in front of control valve and remote sensor.
Place front main log in front of burner system.
Place back main log on back of burner frame.
Back
Main
Log
Middle
Main
Log
Log
Notch
Front
Main
Log
Left
Top
Log
Two (2)
Top
Logs
Two (2)
Cover
Logs