Grill assembly, Fig. 7 fig. 8, Fig. 9 – Sure Heat SGR30M User Manual

Page 6: Fig. 10, Fig. 11 fig. 12

Grill Assembly

4. Install one self tapping screw into the bottom front hole

of the shelf to lock shelf in place. (See Fig. 7)

5. Remove the nut from the orifice end of the side burner

assembly. (See Fig. 8)

6. Cross the orifice of the side burner assembly through

the hole on the bracket of the side IR burner, use the
nut to secure the orifice in position. (See Fig. 9)

7. Slide the valve assembly through the center hole in the

front of the shelf. (See Fig. 10)

8. Insert one valve screw through the bezel and in to the

side burner valve and tighten. Next, install the second
valve screw through the bezel and tighten. Make sure
the bezel is installed with the "H" facing the igniter hole.
(See Fig. 11)

9. Install metal knob, making sure to line up the flat side of

the valve stem with the flat side of the knob stem.

(See Fig. 12)

10. Install grate over side burner. (See Fig. 13)

Self tapping screw

Fig. 7

Fig. 8

Nut

Orifice

Fig. 9

Side burner
assembly

Orifice

Bracket

Nut

Side IR
burner

Fig. 10

Side burner valve

Fig. 11

Fig. 12