Sure Heat Cascade TS29 - Manual (Page 5)

Getting Started
Getting Started
1. Please follow the steps in the order that they are presented.
2. Assemble the grill where you plan to use it.
3. You may want to place an old towel or cloth at the assembly site to prevent nuts and bolts from
becoming lost.
4. Have a friend help. An assistant can make the assembly easier by holding the parts in place
while you fasten the nuts and bolts.
5. To be ready to barbecue immediately, have a L.P. gas cylinder filled by an authorized L.P. dealer
or cylinder exchange center.
Unpacking the Grill Parts
1. Remove and set aside all inner boxes and parts from the master carton.
2. Remove and set aside all wrapping paper and additional packaging from the parts.
3. Do not destroy carton or packing until your grill is completely assembled and operating to your
satisfaction.
Tools needed to assemble grill:
Phillips screwdriver
Adjustable wrench
1/2” wrench or socket
1/4” nut driver or socket
TOOLS NOT INCLUDED
▲ !
WARNING
Failure to follow all Danger, Warnings,
and For Your Safety notices in this Grill
Guide may result in serious bodily injury
or death, fire or an explosion causing
damage to property.
▲ !
DANGER
P e r f o r m a G a s L e a k Te s t
explained later in this Grill Guide
before operating your grill.
5
Self-tapping screw x 12 pcs
Phillips Pan Head M6 x 40 screw x 8 pcs
Phillips Pan Head M5 x 12 screw x 10 pcs
Phillips Pan Head M6 x 10 screw x 4 pcs