Sure Heat Cascade TS29 - Manual (Page 10)

Grill Assembly
10
STEP FIVE
5E
5F
a. Remove the paper from the back of the Mirror Overlay
(5A) and paste it onto the cart door. Make sure the two
holes on the overlay match the holes on the cart door.
b. Remove the protect film on the mirror overlay, Use
one M6 x 10 phillips pan head screws (5B) to attach
one samll handle end (5C) to the cart door.
c. Slide one end of the Door Handle Bar (5D) into the
installed handle end. Attach the second handle end
using the supplied phillips head screw while holding
the cart door assembly in place.
d. Repeat to assemble the other cart door.
e. Place Cart Door Right (5E) on an angle over the right
side door pivot.
f. Tilt the top of the door toward the grill, while depressing
the top door pivot pin above the door edge.
g. Move the door slightly until the pin locks into place in
the hole on bottom of the front face.
h. Repeat steps a - c for Cart Door Left (5F) installation.
5B
5A
5C
5D
5C