Sure Heat Cascade X2000 - Manual (Page 7)

Assembly
7
1b
1c
1a
1d
STEP ONE
a. Use (2) Screws secure the Rubber Door
Stop on the Cart Base.
b. Set the Cart base on the floor and then lay the
Caster Assembly Left on the left side and the
Caster Assembly Right on the right side of the Cart
Base. The angled side of the Cart Base will be
towards the front of the base.
c. Pick up the left side of the Cart Base and set the
Caster Assembly Left in place by inserting the
attached bolts through the three (3) holes in the
Cart Base.
d. Pick up the right side of the Cart Base and set the
Caster Assembly right in place by inserting the
attached bolts through the three (3) holes in the
Cart Base.