Ss 5 assembly – Sure Heat 2007 Amana AM33 User Manual
Page 15

STEP EIGHT
a. Remove two screws from the side burner valve
assembly.
b. Carefully insert the valve assembly into the cast
side burner. You will need to angle the tube into
the burner assembly. Make certain that the hose
is pointing down when the valve is put in place.
Then push the valve stem out through the
opening in the front of the side burner shelf
assembly, lining up the holes on the valve
assembly with the holes on the side burner shelf.
c. Place bezel into place, with the "off" position
pointing up, making sure to line up holes.
d. Attach bezel & valve to side burner shelf with
screws removed in step 8a.
e. Press knob onto valve stem assembly.
SS 5 Assembly
15
8d
8c
8b
8e
close-up of step 8b