Sunny Health & Fitness 012S - Manual (Page 7)

3) Insert the new battery in by tool/finger. Please
make sure the anode (with words) is on the top.
4) Cover the battery with the plastic cap.
5) Connect the wire onto the meter.
6) Insert the meter on Base Frame (1).
2. Please use (1) LR44, 1.5V battery.
3. The monitor is auto-powered. It turns on when exercise begins, and it turns off when no
movement is made between 4 to 5 minutes.
4. All functions will automatically stop calculating when a “stop” sign appears in the upper left
corner of the display monitor. This occurs when there is no signal for a period of 4
seconds. Once the exercise begins again, the meter will automatically start recalculating
and the “stop“ sign will disappear.
Edited with the trial version of
Foxit Advanced PDF Editor
To remove this notice, visit:
www.foxitsoftware.com/shopping
6