Sunny Health & Fitness SF-B1004 - Manual (Page 15)

Assembly & Adjustments
Remove the 3 x M8 Flat Washers (17) and 3 x M8 Nylon Locknuts (16 ) from
Saddle (8). Fix the Saddle to the Saddle Support (5) by refitting the washers
and nuts previously removed. Unlock the Seat Adjustment Knob (18) and slide
the Saddle Support into the Main Frame. Set the Saddle to the desired height,
allowing for a slight bend in the knee at the bottom of the cycle rotation. Re-tighten
the Seat Adjustment Knob (18).
3.
Connect the Handlebar (4 ) to the Handlebar Support using 2 x M8 * 35mm
Allen Bolts (23). Attach the Exercise Monitor (22) onto mounting tab on
Handlebar (4 ) with 2 x M5* 10 mm Screws (21). Connect the Sensor Wire (31)
Page 14
4 .
the
16
17
18
8
5
4
21
22
23
24
26
30
31
the
and Exercise Monitor (22) together.