Sunny Health & Fitness SF-B1203 - Manual (Page 12)

USAGE AND MAINTENANCE
4. B
5
6.
7.
8.
9.
.
efore every workout, please check the pedal axle. If the pedals have become
loose, please retighten them.
1. If there is no signal coming the computer please check if the sensor wires
(46 & 48) are connected correctly.
2. If the display becomes blurry, please replace the batteries to improve the result.
3. This bike can be leveled to
to
compensate for uneven surfaces. To level the bike,
please raise or lower the foot pads, which are located on the bottom of the front
and rear stabilizers. To raise the foot pad, screw it counterclockwise; to lower
the foot pad, screw it clockwise (See picture below). Once the mainframe is
leveled, turn the nut (4) upward and secure it tightly against the front and rear
stabilizers.
#4
Always make sure all hardware parts such as bolts nuts and washers are
positioned correctly and tightly secured.
Always inspect the safety chain guard that protects the moving parts of the
bike to be in safe and good order.
Always inspect the seat post, seat slider, pedals and handlebar to make sure
they are in safe and stable position before using the bike.
It is recommended that you lubricate all moving parts on a monthly basis.
Do not dismount the bike until the pedals are at a complete STOP.