Sunny Health & Fitness SF-E906 User Manual

Page 8

Text mode
Original mode

Diagram 2

Diagram 1:

Disconnect the Connecting Rod
(10L/R) from the Link Connector
Combination (11L/R).

Diagram 2:

Insert the Locking Bolt (47L/R) through
the hole of the Link Connector
Combination (11L/R). Then screw the
Locking Bolt into the Crank Arm (37).
*Remember when assembling the Left
Side; you must screw the Locking Bolt
Counter-Clockwise to tighten*.
Connect the Spring Washer (53) and
Nut (59L/R), and attach the End Cap
(29), as seen in the Diagram on page 5.
You can now re-attach the Connecting
Rod (10) to the Link Connector
Combination (11).

*Please note: The

‘L/R’ in the part

number means there is one part for the
LEFT side, and one part for the RIGHT
side of the machine.