StarTech.com PEX2IDE - Manual (Page 7)

Instruction Manual
4
3. Change the Hard Disk Boot Priority / First Boot Device to enable the system to boot
from the designated drive.
4. Save and exit the BIOS.
Please note that due to variations in BIOS designs, the above instructions may differ
from your system BIOS. For further instruction on how to complete this step, please
consult the documentation that accompanied your motherboard or computer system
purchase.
Specifications
Bus Type PCI Express
Connectors 1 x 40 PIN IDC MALE
Cables 18 in internal IDE Cable
OS Support Windows 2000 / XP / 2003 / VISTA / 7
Chipset JMicron JMB368