StarTech.com PEX2S950 - Manual (Page 6)

Instruction Manual 3
Maximize data transfer rates
Once installation is complete, you will be able to configure the port(s) provided by the card, as
you would any other serial port. To do so, click on Start, then right-click on Manage to open the
Computer Management window.
1. In the left pane, click on Device Manager. Here, you should see two listings for PCI
Communications Port as illustrated below.
2. Right-click on the first listing and select properties, to launch the PCI Communications Port
Properties window.
3. Click on the Data Rate tab, and click on Detect Clock Frequency to automatically detect the
port data transfer capability, then select OK.
4. Repeat steps 1-3 to configure the second added port.