StarTech.com ICUSBANDR232 - Manual (Page 8)

Instruction Manual
5
1. Select “Setting” to configure attributes such as Baud Rate, Stop(bit), Data(bit), Parity,
and Flow Control.
2. Select “Send File” to send/receive files between your Android and serial device.
3. Or, type your desired command(s) in the “CHAR” input field and tap the “Write”
button to send data when the data format button shows “CHAR”.
Note: Tapping the data format “CHAR” button toggles HEX format for sending
hexadecimal data command(s). When inputting two hexadecimal characters, each
character should be from “0” to “9” or from “a” to “f”, otherwise the application will
show a warning message when the “Write” button is tapped.