StarTech.com PEX2S5531P - Manual (Page 4)

Instruction Manual 1
Introduction
Thank you for your purchase of a StarTech.com Dual Profile PCI Express I/O card. This convenient
I/O solution utilizes a native, single-chip design for maximum performance and reliability, and
includes an optional low profile bracket that allows the card to be installed in virtually any size/
form factor case.
Features
• Native PCI Express (single chip)
• Supports data transfer rates of up to: 2.7 Mbps (parallel) 460.8 Kbps (serial)
• Configurable in 5V, 12V, and RI (non-powered) modes
• Compliant with PCI Express base specifications revision 1.0a
• 128-byte deep FIFO per transmitter and receiver
• Automated in-band flow control using programmable Xon/Xoff in both directions
• Automated out-of-band flow control using CTS/RTS and DSR/DTR
• Standard and low profile brackets included
Package Contents
• 1 x PCI-Express I/O Card (LP cards come with a low profile bracket preinstalled)
• 1 x Separate parallel port with ribbon cable (PEX2S5531P only)
• 1/2/3 x Low Profile Bracket (PEX1S553/PEX2S553/PEX2S5531P)
• 1 x Full Profile Bracket (PEX1S553LP and PEX2S553LP)
• 1 x Driver CD
• 1 x Instruction Manual