StarTech.com ICUSB23216F - Manual (Page 7)

Instruction Manual 4
Windows Vista/7/Server 2008 R2
1. Before connecting the Serial Hub to the host computer, insert the included Driver
CD into the computer’s CD/DVD drive.
2. AutoPlay should automatically launch and give you the option to display all of the
folders on the CD. If not, open “Computer” and double-click on the CD/DVD drive.
*installation photos for reference only
3. Enter the folder “232 drv_100804”, then double-click the file “Win_Setup.exe”.
4. This will launch the driver Installation wizard. The installation screen will
automatically close once complete, and all the necessary drivers installed.
5. Connect the Serial Hub to the computer via USB. The Serial Hub will be
automatically detected and Windows should begin installing the drivers.
6. Once Windows has installed the drivers, the serial ports will be ready for use.
Verifying Installation
Windows 2000/XP/Server 2003/Vista/Server 2008 R2/7
From the main desktop, right-click on “My Computer” (“Computer” in Vista/7), then
select Manage. In the new Computer Management window, select Device Manager
from the left window panel.