StarTech.com USB2ESATA User Manual
Instruction manual, Packaging contents, System requirements

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 01/19/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1 x Driver CD
• 1 x Instruction Manual
• 1 x USB to eSATA Adapter
System Requirements
• A Desktop or notebook PC with an available USB 2.0 port
• Windows®2000/XP/Vista™/7, Linux, Mac OS 10 or higher
• Power supply for your SATA/eSATA device
• eSATA to SATA cable (for SATA drive), or eSATA to eSATA cable (for
eSATA enclosure)
USB2ESATA
USB 2.0 to eSATA Adapter / Converter
*actual product may vary from photos
Specifications
Maximum Data
Transfer Rate
480Mbps
Operating System
Support
Windows® 2000/XP/2003/Vista™ /7 /
Mac OS X and higher
Connector Types
1 x SATA Data 7 pin Male
1 x USB A Male
Hardware Installation
Please ensure that any important data from the SATA or eSATA
device is backed up prior to connecting this adapter.
With the computer powered down:
1. Prepare an eSATA to eSATA or eSATA to SATA cable for your SATA device.
2. Connect the SATA device to one end of the SATA cable. Connect
the other end of the SATA cable to the USB2ESATA eSATA port.
3. Connect the eSATA device to the required power adapter (as
determined by the device), and then turn the power on.
4. Switch on your computer. The operating system should detect
this new device and automatically install the appropriate driver.
Driver Installation
Please note that if you are using this device on a computer running
Windows® 2000/XP/Vista™, Linus or Mac OS 10 or higher, no further
driver installation is required, as USB2ESATA is natively supported by
these operating systems.