StarTech.com PS2POWER230 - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 02/03/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1 x 230 Watt AT Power Supply
• 1 x Instruction Manual
• 1 x Power Cord (NA)
PS2POWER230
230 Watt PS2 Replacement Computer PC Power Supply
*actual product may vary from photos
Installation
Note: Check the power supply voltage before installation. It should
be the same as your local power voltage (115V for North America
and 230V for most of the European countries). Change the voltage
setting if necessary.
1. Disconnect the power cord from your old power supply.
2. Follow your computer case manual and open the case.
3. Disconnect all the power connectors from the mother board and
the peripheral devices such as hard drives, floppy disks, etc.
4. Remove the existing power supply from your computer case and
replace it with the StarTech.com power supply.
5. Connect the power connectors to your motherboard and
peripheral devices.
6. Close your computer case.
7. Connect the power cord to the StarTech.com power supply.
Specifications
Dimensions
5.9 x 3.35 x 5.87 in. (150 x 85 x 149
mm)
Weight 2.82 lbs (1.28 kg)
Input Voltage 115/230 V
Output Voltage 230W
Connectors
4 x 4-pin LP4 female, 2 x small internal
power, 2 x LED display power, 1 x PS/2
motherboard adapter