Introduction, Packaging contents, System requirements – StarTech.com DS51002GB User Manual
Page 5: Installation, Packaging contents system requirements
Instruction Manual
2
Introduction
Packaging Contents
• 1 x Ethernet Switch
• 1 x Power Adapter
• 1 x Instruction Manual
System Requirements
• Available AC electrical outlet
• 10/100/1000 Mbps compatible network devices
• Cat3 or better UTP Ethernet cabling (Cat5 or better recommended)
Installation
1. The Network Switch is designed to sit on a flat surface (such as a desktop) or be
securely mounted to a wall or similar surface. If you wish to mount the Network
Switch, first prepare the surface by installing mounting screws (not included)
otherwise skip to Step 5.
2. The distance between the two mounting sockets on the back of the Network Switch
is approximately 13.5cm. Mark the distance on the wall, making sure your marks are
straight and level.
Mounting Brackets