Curtis Mathes CMC13003 - Manual (Page 11)

5 C HAPTER O NE : L EARNING ABOUT Y OUR N EW TV/VCR
L EARNING A BOUT Y OUR N EW TV/VCR
Understanding the
Controls, continued
Remote Control Use the remote control within 33
feet (10 meters) of the TV/VCR and
point it directly at the TV/VCR.
1 POWER
Press to turn the TV/VCR on
and off.
2 Number buttons
Press to select specific
channels.
3 P.PLUS
Press to compensate for a
poor rental tape.
4 MENU
Press to display the on-
screen menu.
5 SPEED
Press to select the tape
recording speed.
6 REC (record)
Press to begin recording.
7 STOP
Press to stop a tape.
8 REW (rewind) -
Press to rewind a tape.
9 PLAY
Press to play a tape.
10 DISPLAY
Press to show on-screen
displays.
11 PRE-CH (previous channel) -
Press to return to the last
channel viewed.
12 LINE IN
Press to select the
component connected to
the Audio/Video jacks.
13 CLEAR
Press to correct
programming errors, clear
programs, or reset the tape
counter.
14 EJECT
Press to eject a tape.
15 P.STD (picture-standard) -
Press to select memorized
or standard picture settings.
16 TRK+, – (tracking) -
Press to adjust tape
tracking.
17 REPEAT
Press to play a tape or a
section of tape repeatedly.
18 MUTE
Press to silence the volume.
19 –VOL and VOL+ (volume) -
Press – VOL to decrease or
VOL+ to increase the
volume.
20 CH and CH (channel) -
Press CH or CH to
change channels. Also used
with the menu system.
21 P. (pause)/STILL
Press to freeze a video
frame.
22 FF (fast forward) -
Press to fast forward a
tape.
AA68-00951A/eng 10/26/00 8:52 AM Page 5