StarTech.com USB300WN2X2D - Manual (Page 6)

Instruction Manual
3
Installation
Windows XP/Server 2003
1. Upon starting Windows, before connecting the USB adapter, insert the included
Driver CD into the computer’s CD/DVD drive.
2. AutoPlay should automatically launch the Driver/Software installation splash screen.
If not, open “My Computer” then open the CD/DVD drive the Driver CD is inserted
into and double-click the file Setup.exe.
3. Select the option to install the Drivers. This will launch the Driver Installation wizard.
4. During the installation, you will be prompted to install only the drivers or also the
Ralink WLAN Utility. If you wish to use the built-in Windows utility for setting up
your wireless connection, then install the drivers only. If you do not wish to use
the built-in Windows Utility (Zero Configuration Utility), then also install the Ralink
Utility. NOTE: You can switch to using the Windows Utility at any time.
5. Complete the wizard and this will automatically install all of the drivers/software.
6. Connect the USB adapter to an available USB port. Windows will automatically
install the drivers.
NOTE: The USB cable has two connectors (Primary, Secondary). Only the Primary
connector must be connected. If the USB port is unable to provide enough power for the
adapter, then the Secondary connector can also be plugged in for supplementary power.