StarTech.com MCM110ST2EU User Manual
Instruction manual, System requirements, Installation
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 08/14/2012
For the most up-to-date information, please visit: www.startech.com
MCM110SC2 / MCM110SC2GB / MCM110SC2EU
MCM110ST2 / MCM110ST2GB / MCM110ST2EU
10/100 Ethernet to Multi Mode Fiber Media Converter SC/ST 2km
Packaging Contents
• Fiber/Ethernet media converter
• Power Adapter
• Instruction Manual
System Requirements
• 10/100Base-TX compatible Ethernet network
• 100Base-FX fiber network
• SC/ST multi-mode fiber cable
• Available AC electrical outlet
Installation
1. Connect the Ethernet cable to the Fiber Media Converter “LAN” port.
2. Connect the other end of the Ethernet cable to the router/switch/
computer NIC.
3. Connect the fiber cable into the fiber receptacle on the media converter.
4. Plug the provided power adapter into the media converter, and
into an available AC power outlet.
5. Connect the other end of the fiber cable into the router/switch/
computer NIC/another media converter. Remember to reverse
the TX and RX leads between the two devices.
DIP Switch Settings
Switch
Function
State
Status
SW1
UTP Mode
Auto
Auto UTP detection
Manual Use manual UTP settings
SW2*
UTP Speed
100
100Mbps link speed
10
10Mbps link speed
SW3*
UTP Duplex
Full
Full duplex
Half
Half duplex
SW4
Link Fault Pass-
through
LFP
LFP mode off
ON
LFP mode on
*not enabled when SW1 set to ‘Auto’
LED Indicators
LED
Function
State
Status
PWR
Power
Indicator
ON
Converter has power
OFF
Converter has no
power
FX Link/Act
Fiber Link/
Activity
ON
Fiber link OK
OFF
No link detected
Flashing
Receiving data
FEF
Far End Fault
ON
Far end link failure
OFF
No failure detected
100
Mode
ON
100Mbps
OFF
10Mbps
Full
Duplex Mode
ON
Full duplex mode
OFF
Half duplex mode
TX Link/Act Ethernet Link/
Activity
ON
Ethernet link
detected
OFF
No link detected
Flashing
Receiving data
*actual product may vary from photos
DIP Switches
LED Indicators
RJ45 Ethernet
Connector
ST Fiber
Connectors
DIP Switches
LED Indicators
RJ45 Ethernet
Connector
SC Fiber
Connectors