StarTech.com 35BAYUSB3S4 - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 09/29/2011
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1 x 3.5” Front Panel USB 3.0 Hub
• 1 x USB 3.0 Cable
• 1 x Mounting Screw Kit
• 1 x Instruction Manual
System Requirements
• Available 3.5” front bay opening on computer case
• Available 15-pin SATA power connector on power supply
• Available internal or external USB 3.0 type A port
35BAYUSB3S4
4 Port USB 3.0 Panel Hub for 3.5” Front Bay - Black
Installation
WARNING! Computer parts can be severely damaged by static
electricity. Be sure that you are properly grounded before opening
your computer case. StarTech.com recommends that you wear
an anti-static strap when installing any computer component. If
an anti-static strap is unavailable, discharge yourself of any static
electricity build-up by touching a large grounded metal surface
(such as the computer case) for several seconds.
1. Turn your computer off and any peripherals connected to the
computer (i.e. Printers, external hard drives, etc.). Unplug the
power cable from the rear of the power supply on the back of the
computer and disconnect all peripheral devices.
2. Remove the cover from the computer case. See documentation
for your computer system for details.
3. Remove the cover plate on a 3.5” front bay opening. See
documentation for your computer system for details.
4. Slide the 35BAYUSB3S4 panel into the 3.5” bay and secure to the
computer case.
5. Connect a SATA power connector from the computer power
supply to the 35BAYUSB3S4.
6. Connect the USB 3.0 cable from the 35BAYUSB3S4 to an available
USB 3.0 connector. If no internal ports are available, you may
need to route the cable outside the case and use an external port.
7. Place the cover back onto the computer case.
8. Insert the power cable into the socket on the power supply and
reconnect all other connectors removed in Step 1.
SATA Power
connector
USB 3.0 type B
connector (host)
*actual product may vary from photos
Port Link LEDs
USB 3.0 type A connector
Front View
Rear View