StarTech.com SATDOCKU2EEU - Manual (Page 5)

Instruction Manual
2
Rear View
DC Power
Adapter
eSATA
Port
On/Off
Switch
USB
Port
Disk Installation
1. Connect the Dock to an available power outlet, using the provided power adapter.
2. Connect the Dock to the (powered) Host Computer, using the provided USB/eSATA cables.
3. Insert the 2.5” or 3.5” SATA/SATA II drive(s) you wish to install, such that the SATA
power and data connectors at the back of the drive are properly aligned with the
corresponding connectors inside the Dock.
4. Switch the power switch to “ON” position.
5. Once the drive has been inserted, the operating system will detect that it has been
connected and automatically update the drivers for proper operation.
SATA Drive Removal
You can remove SATA drives from the docking station by gently pulling them out from
the top of the dock.