StarTech.com SAT3540U2E - Manual (Page 8)

Instruction Manual
5
How to Use
eSATA/USB Connectivity
The enclosure features two separate host interfaces, which can be physically
connected at the same time, however only one will be active at a time. The enclosure
could even be connected to two different computers, one over eSATA and the other
over USB, and then switched between. The eSATA and USB Link LEDs, located above
the Power button, will indicate which interfaces are connected, while the eSATA and
USB Mode LEDs will indicate which interface is currently active.
LED Status Description
ON
eSATA connection detection
OFF
ON
USB connection detection
OFF
ON
eSATA interface active
OFF
ON
USB interface active
OFF
To switch between interfaces, press the ‘Interface’ button.
Fan Speed Control
The cooling Smart Fan is automatically controlled by an integrated thermal sensor,
but can also be set manually. The fan is capable of running at 3 different speeds
depending on the temperature range of the enclosure (less than 45 o C, between 45-
54 o C, and greater than 55 o C), or set manually to run constantly at one speed.