beautypg.com

Driver installation – StarTech.com SAT2510SCB User Manual

Page 5

background image

Instruction Manual

2

3. From the bottom attach 2 screws to secure the hard drive to the rear panel.
4. Slide the hard drive with rear panel into the metal enclosure.

5. Attach two screws. You can now attach the enclosure to a computer system via the

integrated USB cable.

NOTE: A DC power connector for an external power adapter is located under the built-

in USB cable. This would be necessary for any hard drives that cannot draw enough

power from the USB port alone.

Driver Installation

Windows 2000/XP/Vista/7, Mac OS 9.2/10.x, or Linux/Unix

No driver installation is required for these operating systems, as this enclosure is

natively supported, so the drivers are already installed.