StarTech.com S3510BMU33ET - Manual (Page 7)

Instruction Manual
4
3. If connecting the enclosure via USB 3.0, connect the USB 3.0 cable from the
enclosure to a USB port on the host computer system.
Or
If connecting the enclosure via eSATA, connect the eSATA cable from the enclosure
to an available eSATA port on the host computer system.
NOTE: Some legacy computer systems may not automatically detect an eSATA
connection. To manually detect the hard drive, scan for hardware changes within
Device Manager, or reboot the system upon .
4. Connect the power adapter from an available AC outlet to then enclosure. Turn on
the unit by Pushing the Power button at the back of the unit.
How to Use
Connecting the Hard Drive
Once the enclosure has been attached to a computer, the drivers will install
automatically, and the inserted drive will be accessible as though it were installed
within the system.
Prior to using the drive, it will need to be formatted according to your operating
system requirements. Refer to Initializing the Hard Drive
LED Indicator
The hard drive enclosure offers an LED indicator, to enable you to monitor drive
activity. The LED will flash while the hard drive is being accessed. Do not remove the
enclosure from the host computer while the LED is flashing, as it could damage the
drive or the enclosure, resulting in data loss.