StarTech.com SAT2510BU2E - Manual (Page 7)

Instruction Manual
4
4. Fasten the front panel (with drive attached) to the rear panel (enclosure), using the
screws removed in step #1.
5. To connect the hard drive enclosure to a host computer using USB, simply insert the
included USB cable into the USB type Mini B slot provided by the enclosure, and the
remaining end into an available USB type A slot on the host computer.
6. To connect the hard drive enclosure to a host computer using eSATA, simply plug
the included eSATA cable from the enclosure to the host computer. To provide
power to the enclosure, connect the USB to DC cable (provided) to an available
USB port on the host computer, and insert the remaining end into the power port
located on the hard drive enclosure.
Driver Installation
Windows 2000/XP/Server 2003/Vista, 7, Mac OS X, Linux
No driver installation is required for these operating systems, as this enclosure is
natively supported, so the drivers are already installed.