StarTech.com S352BU33HR Quick Start - Manual (Page 9)

Instruction Manual
6
6. Using the included power adapter, connect the Power Adapter Port on the
S352BU33HR to an available power outlet.
7. Connect the S352BU33HR to your computer system using the included
USB 3.0 cable.
8. Set your desired RAID configuration and power on the device.
WARNING! In order to prepare your drives for RAID operation, this enclosure will
configure newly installed drives into your desired RAID configuration. Please be
aware that any data currently on the drives may be lost during this process. It is
recommended that you back up all data prior to setting your RAID configuration.
a) Ensure the S352BU33HR is powered off.
b) Adjust the RAID Control Switch to your desired RAID configuration (See Available
RAID Configurations).
c) Press and hold the set RAID button while turning on the S352BU33HR on by
pressing the Power Button.
Note: RAID configuration is only required for initial configuraiton or if you would like to
change your RAID configuration.