StarTech.com SAT35401U - Manual (Page 6)

Instruction Manual
3
WARNING! Hard drives and storage enclosures require careful handling, especially
when being transported. If you are not careful with your hard disk, lost data may
result. Always handle your hard drive and storage device with caution. Be sure that
you are properly grounded by wearing an anti-static strap when handling computer
components or discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds.
Hardware Installation
1. Open the Drive Door on the front of the enclosure, by inserting the provided key,
into the key hole, and turning clockwise. The door will swing open outward.
2. Slide up to four drives into the available HDD installation bays.
3. Close the drive door by swinging it up, and lock it closed by inserting the provided
key and turning it counter clockwise.
4. Connect the mini SAS cable (not included) from the External Mini SAS port on the
SAT35401U, to your SAS/SATA Host controller.
5. Connect the included power adapter from the Power Adapter port on the
SAT35401U to an available AC Power outlet.