beautypg.com

StarTech.com S251SMU33EP User Manual

Page 7

background image

Instruction Manual

4

5. Using the included Philips head screw driver, attach the hard drive tray to the

enclosure, by driving 2 of the enclosure installation screws (smaller included screws)

into the side hard drive tray mounting holes on the enclosure.

6. Complete installation by connecting your hard drive enclosure to your computer

using eSATA/eSATAp or USB 3.0.

a) If using USB:

i. Connect the included USB 3.0 cable from the micro USB port on the hard

drive enclosure to an available USB port on your computer system.
b) If using eSATA:
i. Connect the included eSATA cable from the eSATAp port on the hard drive

enclosure to the eSATAp / standard eSATA port on your computer system.
ii. Connect the included USB to DC power cable from a USB power source to

the power adapter port on the enclosure.
c) If using eSATAp:
i. Connect an eSATAp cable (not included) from the eSATAp port on the hard

drive enclosure to the eSATAp port on your computer system.
Note: If no eSATAp cable is available, you can use the included USB to DC Power

cable to provide power to the enclosure.