StarTech.com S352BU33RER Quick Start - Manual (Page 9)

Instruction Manual
6
e) (optional) Using an included Drive Door Key, turn the Drive Lock counter
clockwise to the LOCK position.
Note: If you are installing more than one drive repeat these steps on the remaining
drive door.
2. Using the included power adapter, connect the Power Adapter Port on the
S352BU33RER to an available power outlet.
3. Connect the S352BU33RER to your computer system using the included USB 3.0
cable or the eSATA cable depending on your desired host connection.
4. Set your desired RAID configuration and/or power on the device.
WARNING! In order to prepare your drives for RAID operation, this enclosure will
configure newly installed drives into your desired RAID configuration. Please be
aware that any data currently on the drives may be lost during this process. It is
recommended that you back up all data prior to setting your RAID configuration.
a) Ensure the S352BU33RER is powered off.
b) Adjust the RAID Control Switch to your desired RAID configuration. (See list of
RAID configurations)
c) Press and hold the RAID Mode Button while turning on the S352BU33RER on by
pressing the Power Button.
Note: RAID configuration is only required for initial configuraiton or if you would like to
change your RAID configuration.
REBUILD