StarTech.com 4POSTRACKHD - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 06/21/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1x 4 Post Heavy Duty Rack Assembly Kit
• 1x Assembly instructions
• 1x Pack of 50 Screws and Nuts
4POSTRACKHD
45U 3300 lbs 4 Post Open Server Equipment Rack - Flat Pack
Tools Required
• 2 x 14mm wrench
Assembly
1. Lay the vertical rails face down. At one end, place a top/bottom rail
and insert three hex head bolts and fasten with three head nuts.
2. Install a second top/bottom rail at the other end of the vertical rail.
3. Repeat Step 2 to attach the second vertical rail. Repeat Steps 1 to
3 to assemble the other side.
4. Connect the vertical rails together using the join brackets.
Insert the hooks into the slots on the vertical rails. Insert two
hex head bolts and fasten with two head nuts for each side.
5. Securely attach the join brackets at the top and bottom ends on
a single side first. Then reverse the rack and repeat the same steps
on the other side.
6. Finished assembly of rack.
7. Stand up the frame and check that all the bolts are tightened.
Bottom of Rack Top of Rack
WARNING!
To prevent bodily injury, please ensure that the rack
is installed in a structurally sound environment with a level floor
and that all hardware has been assembled securely, and checked for
stability before loading equipment. When installing equipment into
the rack, start from the bottom of the rack first and move upwards,
keeping the heaviest equipment at the bottom to avoid a situation
where the rack becomes top-heavy.