StarTech.com SV1632DS - Manual (Page 21)

19
Figure 11: Cascaded 4-port StarViews
Figure 12: Cascaded 8-port StarViews
For OSD model:
After connection completes, you should re-activate the
OSD menu to check if the Master recognizes the Slaves.
A triangle mark (
4) is placed to the right of the channel
name indicating the port is connected to a Slave not a
computer. A number to the left of the triangle mark
indicates the Slave model, i.e. 8
4 for SV831 or SV831D.
Change Configuration while Running
Devices at any 'PC x' port can be changed at any time after initial
power-up. If you change any one of the “PC 1” to “PC 8” ports
connection from a computer to a Slave or vice versa, or replace the
devices of a port; the OSD will update this change the next time it is
activated. [NOTE: Any new device, a computer or a Slave, must be
turned off before it is connected to the Master.
Multi-access StarView
Overview
The advanced multi-access SV832DS and SV1632DS have all the
features of SV831D and SV1632D respectively. Both models have
two console ports facilitate you to access multiple computers from