StarTech.com SV431USBA - Manual (Page 7)

Instruction Manual
4
Keyboard Hotkey Command Reference Chart
Command Name Hotkey Sequence Description
Select active computer [ScrLk]+[ScrLk]+[x]
Switches access to the computer connected to the
corresponding port number on the KVM.
([x]= a number on the keyboard)
Select Audio/Mic
output
[ScrLk]+[ScrLk]+[Fy]
Switches which port’s speaker and microphone
output is active at the console
([Fy] = Function key: F5=Port 1, F6=Port 2, etc.)
Bind computer and
Audio/Mic control
(default)
[ScrLk]+[ScrLk]+[Q]
When either the select active computer or
select audio/mic output control commands are
executed, both functions are switched to the
selected port.
Unbind computer
and Audio/Mic output
control
[ScrLk]+[ScrLk]+[W]
The computer control and USB hub control can be
executed separately; KVM control and Audio/Mic
output control can be assignedto different ports
at one time.
Select next/previous
port
[ScrLk]+[ScrLk]+[ , ]
Selects the next (up arrow key) or previous (down
arrow key) numbered port for control
Select previous port [ScrLk]+[ScrLk]+[BkSp] Selects the most recent previously active port.
Beep sound on/off [ScrLk]+[ScrLk]+[B] Enables/Disables audible responses from the KVM.
Define new Hotkey
sequence
[ScrLk]+[ScrLk]+[H]+[y]
Change the standard [ScrLk] hotkey to a new
value (see below)
Autoscan [ScrLk]+[ScrLk]+[S]
Automatically switch active ports in sequence
every 10 seconds. (press any key to cancel)
Autoscan with
programmable display
[ScrLk]+[ScrLk]+[S]+[z]
Autoscan with a delay other than 10 seconds (see
below). Press any key to cancel.