StarTech.com SVUSB3DSA - Manual (Page 4)

Instruction Manual
2
Introduction
Packaging Contents
• 1x USB 3.0 Dual System Swap Adapter
• 1x Driver CD
• 1x Instruction Manual
System Requirements
• Available USB 2.0/3.0 port (USB 3.0 recommended)
• CPU: Intel Core i3 2.8GHz or higher
• RAM: 2GB memory or higher
• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64)
Installation
Notes:
• The adapter should not be connected to either system until the software is installed
and the system has been restarted.
• It is not recommended to connect the USB 3.0 Dual System Swap Adapter via an
external USB Hub.
• It is recommended to un‐install other USB to Graphics drivers before installing USB
3.0 Dual System Swap adapter drivers (they can be re-installed afterwards).
1. Insert the included Driver CD into your CD/DVD drive.
2. On the first of your 2 systems that will be connected to the adapter, run the Setup.
exe application from the Autoplay menu. If Autoplay is disabled on your system,
browse to your CD/DVD drive and run the application.