StarTech.com SV1631DUSBUK - Manual (Page 14)

Instruction Manual
11
Change Leading Hotkey
The default leading hotkey sequence involves pressing the left <CTRL>
twice in succession (e.g. left <CTRL>, left <CTRL>). This can be changed
to the right <CTRL> key instead, to avoid accidental activation due to
using the left <CTRL> key for functions such as Copy/Paste.
To change the leading hotkey sequence to Right <CTRL>:
Left , Left , hold , press Right
All hotkey commands that previously required pressing the Left <CTRL> will be
switched to requiring the right <CTRL> instead.
To change the leading hotkey sequence back to Left <CTRL>:
Right , Right , hold , press Left
Sun/Mac Keyboard Mapping
The KVM Switch emulates a Sun Keyboard when a computer is marked with a Sun, in
the OSD menu by Function Key <F5>. A Sun keyboard has more keys than a standard
PC keyboard. These extra keys are simulated by tapping the Right <CTRL> button,
which is normally located on the right lower part of the keyboard, followed by one
of the function keys on the general keyboard (i.e. combo key). For example, tap the
Right <CTRL> key, and then tap the function key F7 to activate Open for a
Sun computer.
NOTE: For older Sun Operating Systems, the switch does not support the LowPower
option under Power Off Select.
For keystroke emulation of Sun/Mac computers, please refer to the above chart and
conduct the following two examples:
Stop A function in Sun: Press right <CTRL> and release, then within two seconds
press F1 and A in sequence.
Help function in Sun: Press right <CTRL> and release, then within 2 seconds, press H.