StarTech.com SV431USB - Manual (Page 8)

Instruction Manual 5
Operation
Front Panel
1. On-line LED and Selected LED:
When the LED turns green, the connected computer is powered-on When a computer is
selected its corresponding red LED illuminates.
2. Push buttons:
Each computer has a button associated with it on the front panel
for selection.
Auto Scan
Auto Scan automically scans through computers one by one in a fixed interval (see Scan Time
below). Note: Keyboard or mouse is not operable during Auto Scan.
• For SV231USB
It sets the scan interval for Auto Scan. The Scan Time options are 3, 8, 15 and 30 seconds.
Note: Scan Time is automically set to the default of 3 seconds when the KAG switch
loses power.
• For SV431USB
To activate Auto Scan, press down front panel push buttons “3” and “4” simultaneously.
The port LED flashes during Auto Scan. Auto Scan is effective for powered-on computers
only. To exit the Auto Scan mode, just tap any one of the push buttons.
To change the Scan Time interval, press both fron panel buttons “1” and “2”
simultaneously. The SV431USB beeps 1, 2, 3, or 4 times for Scan Time of 3, 8, 15, or 30
seconds respectively.