StarTech.com 1UCABCONS19 - Manual (Page 17)

Instruction Manual 14
Touchpad Replacement
The built-on Touchpad offers “wheel mouse” functionality. The area of the
Touch Pad to the right side of the two small triangular marks is the simulated
“wheel” as shown below:
Scroll
Wheel
Area
Triangular Marker
Left Mouse Button Right Mouse Button
To remove the Touch Pad, press the tab underneath it upward to release the
latch, then slide it outwards until the Touch Pad can be lifted up clear from the
notches, as shown in the figure below (right side). The Touchpad is attached by
a piece of mini-USB cable. To install the Touchad, extend just enough mini-USB
cable and slide the Touch Pad all the way in till you hear a click sound as it is
locked in position.
Triangular Mark**
**Please note that the triangular mark must face outward