StarTech.com RKCONS17HDGB - Manual (Page 16)

Instruction Manual
13
3. Install three of the included #6-32x6 Flat Screws into the rear of the console on
both sides.
Completed installation:
PC / Server Connection
1. Turn off the PC / Server you are connecting to the console.
2. Using one of the included cable sets, connect the appropriate video (VGA / DVI)
connector to the video output of your PC / Server. Then connect either the PS/2
keyboard/mouse connectors, or use the USB interface.
3. Connect the other end of the cables to the rear of the console.
NOTE: Move the PS/2-USB Selector Switch on the rear of the console to either side to
select your desired interface